Accurate choice of materials and attention to working and treatment processes of all parts of a crimp applicator make this product long lasting and reliable. The construction concept is a product adaptable to main manual and automatic crimp units available in the market and easy to customise for any requested terminal. Our basic version includes the 4-position head for height adjustment. Each crimp applicator is delivered complete with instructions handbook saved on pen drive and crimped samples done during the factory acceptance test.
4-POINT APPLICATOR – MODEL TMT1
This model has been made to perform 4-point crimping on TURNED bulk articles. Loading of the articles is performed by hand and crimping is obtained by means of concentric movement of closing punches. It allows to work several articles on the same tool by simply replacing the sleeve used for insertion of the article.
DOUBLE-APPLICATOR FOR SIMULTANEOUS CRIMPING – MODEL TMSE5
This model can process and crimp two identical articles simultaneously. The applicator may be either mechanical or pneumatic version depending on the article to process.
APPLICATOR FOR THERMAL PROTECTORS – MODEL TMTP10
This model has been specifically made for working and crimping of thermal protectors. Loading of the thermal protector is performed by hand. Model TMP10 may be combined with a crimping unit model KM1110 equipped with vibration feeder in order to perform the process automatically.
APPLICATOR FOR IDC CONNECTORS – MODEL TMC1 / TMCP1
For IDC connectors we can offer customised solutions based on customer’s requirements and type of connector. The applicator may be delivered either as mechanical or pneumatic version.
APPLICATOR FOR TWIN CABLE
This model is specific for working of flat cable as well as for closing the connector at the cable’s ends and at an intermediate position.
APPLICATOR FOR MEDICAL NEEDLES
This is a special applicator for the medical sector that performs both, the incision on the article and the crimping of the signal wire.
TOOL-LESS APPLICATOR MODEL TMTRD005
This applicator consists only of a standard body, without any part for crimping and/or cutting-out. The applicator can be customised according to working requirements.
This micrometric device is composed of two overlapped ring nuts and a shared reference index. The upper ring nut, distinguished by a series of letters, allows the adjustment of the pressure on the conductor whilst the second ring nut, distinguished by a series of numbers, allows the adjustment of the pressure on the insulation. At every turn both ring nuts perform the minimum incremental displacement 0.02 mm. The advantage of this system is to offer immediate reading of the indexes and the possibility to discriminate different types of insulation – at equal cross section of the conductor (for ex. Standard, Phase 3 etc.). This applicator allows, additionally, to avoid any intervention on crimping units having different Shut-Height values. It is also possible to exchange the micrometric device with the basic version -the graduated wheel- without need to intervene on other parts of the applicator’s assembly.
Applicators can be delivered equipped with non-resettable counter to allow monitoring the useful life of components and programme the replacement of the applicator’s crimping tools.
All data and measures are indicative and can be changed without notice. Certain types of extremely hard, tough wires may not be able to be processed even if written within the indicated ranges. In case of doubt, KM Corporate is willing to produce samples of your wire.
In the catalog, a wide selection of equipment and machinery for electrical wiring processing. If you do not find what you are looking for, do not hesitate to contact us.