STANDARD MINI APPLICATOR

Accurate choice of materials and attention to working and treatment processes of all parts of a crimp applicator make this product long lasting and reliable. The construction concept is a product adaptable to main manual and automatic crimp units available in the market and easy to customise for any requested terminal. Our basic version includes the 4-position head for height adjustment. Each crimp applicator is delivered complete with instructions handbook saved on pen drive and crimped samples done during the factory acceptance test.

CRIMP APPLICATOR – MODEL TME1
Crimp applicator for end feed terminals.

CRIMP APPLICATOR – MODEL TMS1
Side feed applicator with standard feeding left/right.

CRIMP APPLICATOR – MODEL TMS4
Side feed applicator with feeding right/ left.

APPLICATOR KSP SPLICE – MODEL TMG1
This special applicator model has been specifically made for parallel and
junctions connections.

AVAILABLE OPTIONS

MICROMETRIC WHEEL
This micrometric device is composed of two overlapped ring nuts and a shared reference index. The upper ring nut, distinguished by a series of letters, allows the adjustment of the pressure on the conductor whilst the second ring nut, distinguished by a series of numbers, allows the adjustment of the pressure on the insulation. At every turn both ring nuts perform the minimum incremental displacement 0.02 mm. The advantage of this system is to offer immediate reading of the indexes and the possibility to discriminate different types of insulation – at equal cross section of the conductor (for ex. Standard, Phase 3 etc.). This applicator allows, additionally, to avoid any intervention on crimping units having different Shut-Height values. It is also possible to exchange the micrometric device with the basic version -the graduated wheel- without need to intervene on other parts of the applicator’s assembly.

COUNTER
Applicators can be delivered equipped with non-resettable counter to allow monitoring the useful life of components and programme the replacement of the applicator’s crimping tools.

All data and measures are indicative and can be changed without notice. Certain types of extremely hard, tough wires may not be able to be processed even if written within the indicated ranges. In case of doubt, KM Corporate is willing to produce samples of your wire.